دانلود نرم افزار 1.11 pipe Flow Advisor

دانلود نرم افزار 1.11 pipe Flow Advisor

دانلود نرم افزار 1.11 pipe Flow Advisorدانلود نرم افزار 1.11 pipe Flow Advisor

Flow Advisor can be used to estimate water flow rates from various open channels, closed channels and differently shaped supply tanks. It can calculate:
Open Channel Flow and Flow in Part Filled Pipes
Water Flow Rates
Time taken to empty tanks
Volume, Capacity, Weight and Expansion
Flow Advisor’s Materials Database is included with density and coefficient of expansion of many common materials..

A Fluid Database is included with density of common fluids.

[ Download Free Trial ]
OPEN CHANNEL FLOW AND PART FILLED PIPES

Open-channel flow occurs when a liquid flows due to gravity. Usually the flowing liquid has a free surface, as in a channel, flume or partially full pipe. The liquid is not under pressure, other than atmospheric pressure. Many formulae have been developed to estimate the flow rate in open-channels, the Manning formula has become widely accepted as the usual method of estimating flow rate.
WATER FLOW RATE CALCULATION

The Manning formula uses a coefficient to correct for the type of channel in use. The cross-sectional area of the flow, the wetted perimeter of the flow and the slope ratio must be calculated. The results are more accurate if the flow cross-section, velocity, depth and slope are constant (steady flow). The flow rate estimates are applicable to water or fluids similar to water.
TIME TAKEN TO EMPTY TANKS

The flow rate from a tank outlet will be dependant on the orifice size, orifice type and the head of fluid above the outlet position. The additon of an oulet pipe may restrict the oulet flow rate unless the outlet pipe is relatively short. As the tank empties the fluid head will reduce progressively, reducing the outlet flow rate. The shape of the tank will also affect the time taken to empty, as changes in shape will affect the rate of change of the fluid head available.
VOLUME, CAPACITY, WEIGHT & EXPANSION

The inner volume, fluid capacity, weight and expansion of various pipes, sections, channels and tanks can be calculated. The weight of a pipe, channel or tank in various material constructions (steel, wood, aluminium, brass etc.) and the fluid contents may be displayed by entering the appropriate dimensions and choosing the material and fluid type.

لینک دانلود:
http://dl.dropbox.com/u/6330477/leran/PipeFA1.11.exe

پسوورد:
www.civilstars.com

در تاریخ : 2014-04-16 07:04:55